Dimas Aryasatya

 

How to Shoot Photos at Night: 9 Night Photography Tips

         Night photography can capture spectacular nighttime landscapes with city lights and night skies full of stars. It’s also a great opportunity to experiment with different camera settings and equipment. Slow shutter speeds give you long exposure times, which allow you to capture star trails or light trails left by moving cars. To get the most out of your night shots, you’re going to need to plan ahead and know the settings of your camera inside and out. 

1. Scout your location. Given that you will be working in the dark, scout your location to plan your images before shooting. Make note of any possible challenges or obstacles. Is the site lit with artificial light? Can you best maximize the light you have?

2. Prepare for long periods outside. When shooting at night, prepare to be outside for long periods of time. It takes time and effort to get great night photography shots, from setting up the tripod and camera to adjusting the camera settings for proper exposure time. Keep in mind that it can be difficult to change camera settings when your hands are cold, so it might be a good idea to bring a few hand warmers with you or some gloves.

3. Bring a flashlight. Even with ambient urban light, it still might be difficult to see your camera’s manual controls or see the screws for your tripod. A small flashlight is a useful light source as you make your way through the night. You might even be able to use it to light part of your image.

4. Shoot in manual mode. Shooting manual gives you total control over your camera’s settings. Since nighttime photography requires you to work slowly and methodically, take the time to get your settings right.

5. Lower your aperture. Exactly how low this is will depend on your camera and lens, but you’ll want to get as much light as you can from your f-stops.

6. Keep your camera’s ISO as low as possible. You might think that working with low light would require a high ISO setting, but that could be a mistake. The higher your ISO, the more grain becomes an issue, so you’ll want to go as low as possible. Take a couple of test shots at various ISO settings.

7. Use a tripod for long exposures. Nighttime photography usually requires long shutter speeds of 10 seconds or more so you can soak as much light up from your environment as possible. How do you keep your shot focused for 10 or more seconds? For that, you’re going to need a sturdy tripod.

8. Shoot in bulb mode for longer exposures. If you’re working with extra-long exposures (longer than 30 seconds) you’re going to need to set your DSLR to bulb mode. This is the ideal setting for light painting and other experimental styles, but in order to keep your camera stable, you may want to invest in a remote shutter release.

9. Make sure you’re shooting RAW. The downgrade in quality that JPEG introduces can kill your nighttime shots, so stick with RAW. You’ll be thankful to be working with unprocessed images if you want to play around with your colors in post-processing.